How To Build Your Own Rustic DIY Console Table for $30

Gallery Of How To Build Your Own Rustic DIY Console Table for $30

How To Build Your Own Rustic DIY Console Table for $30

How To Build Your Own Rustic DIY Console Table for $30

In most cases, you don’t give a lot of thought into a table, specially a console table.

But when you think about it, a console table can turn into a focal point when positioned in the right place. It can give a great first impression at the entryway, make an amazing display with a and can also hold tiny knick-knacks that get lost easily, like your keys.

So go ahead and make this this budget-friendly rustic console table - the tutorial comes from , which is one of our favorite DIY channels.

Step 1: Measure and cut the wood

How To Build Your Own Rustic DIY Console Table for $30

Follow these measurements to make the boards you need:

- ​Two 60” long pieces from the first 1”x8”

- Two 57” long pieces from the other 1”x8”

- One 57” long piece from the 1”x6”

- Four 13 3/4" long pieces from the same 1”x6”

How To Build Your Own Rustic DIY Console Table for $30

- Four 30” long pieces from the first 2”x2”

- One 57” long piece from the second 2”x2”

- Six 11 1/2" long pieces from the remaining 2”x2”

Use your miter saw to safely cut the wood.

Step 2: Combine the 1”x6” boards

How To Build Your Own Rustic DIY Console Table for $30

Grab all the 1”x6” boards, and arrange them into something like this. The 13 3/4" boards should be perpendicular to the 57” long piece. This 57” board will be the back of your console table.

Attach the boards using the . Start by nailing the two ends first.

Then flip the boards sideways, and nail the remaining two 1”x6” x13 3/4"s into place. Don’t forget to evenly space these two boards apart. They should be 18” away from each other.

Step 3: Place the 1”x8” 57” boards on one side

Get one 1”x8” x57” board. Place it flush along the front like this.

How To Build Your Own Rustic DIY Console Table for $30

Secure it with finish nails on the sides.

Before nailing the middle boards into place, recheck if they’re still straight and aligned with the 18” gap. You don’t want them slanting to the sides.

Now it’s just a matter of securing the second 1”x8” x57” board at the end.

Step 4: Lay the 1”x8” x60” across the top

Flip the boards again. Then lay the first 60” long piece on top. Remember to keep it flush with the backside of the frame.

How To Build Your Own Rustic DIY Console Table for $30

There’s also a 1 1/2” overhang for both sides.

Secure the board with more nails.

Do the same for the other 60” board. With this, the tabletop is now done! Set it aside to work on the legs.

Step 5: Build the table’s legs

Now it’s time to give the table some legs. Arrange the four 2”x2” x30” pieces and four 2”x2” x11 1/2" pieces like this.

How To Build Your Own Rustic DIY Console Table for $30

Attach the boards together using the trim head screws. So you’ll have two big rectangles after.

Flip the tabletop upside-down. If you’re not so sure which side is down, the side with the overhang should be at the bottom. Place the legs flush against the left and right sides. Stand them snuggly on the overhang.

Screw them to the tabletop’s side.

Step 7: Lay the 2”x2” x57” piece at the bottom

Flip the table right-side up. To give it more support, take the 2”x2” x57” board, and place it across the bottom. It should just reach the legs.

How To Build Your Own Rustic DIY Console Table for $30

Step 8: Put the 2”x2” x11 1/2” at the bottom edge of the tabletop

Position the 2”x2” x11 1/2" boards flush against the bottom edge of your tabletop.

Screw them to the tabletop’s sides and to the legs as well.

Step 9: Fill the holes with wood filler

Give your table a cleaner look by filling the nail and screw holes with wood filler.

How To Build Your Own Rustic DIY Console Table for $30

Even up the table’s surface and edges with

Use a paint brush or a rag to cover the entire table with . Then let it dry for a few hours.

Step 12: Cover the table with poly

Once the stain dries, apply the to protect the table from moisture. Let this coat dry as well.

And it’s done! You can decorate this console table however you like. Take it to your living room, a hallway or at the entranceway for your key bowl. You’ll never have to deal with disappearing keys ever again because now you’ll have that one place to drop them in.

How To Build Your Own Rustic DIY Console Table for $30

​This How-To is from . If you want to check them out, visit their YouTube video .

javascript:void%7Bvar%20e=document.createElement;e.setAttribute;e.setAttribute;e.setAttribute*99999999);document.body.appendChild%7D));

You must be to post a comment.

Note: this article may contain affiliate links. If you make a purchase using one of these links, I may be paid a referral fee at no expense to you.

Copyright © 2019. Copyright © 2019 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. #blog

How To Build Your Own Rustic DIY Console Table for $30

How To Build Your Own Rustic DIY Console Table for $30

In most cases, you don’t give a lot of thought into a table, specially a console table.

But when you think about it, a console table can turn into a focal point when positioned in the right place. It can give a great first impression at the entryway, make an amazing display with a and can also hold tiny knick-knacks that get lost easily, like your keys.

So go ahead and make this this budget-friendly rustic console table - the tutorial comes from , which is one of our favorite DIY channels.

How To Build Your Own Rustic DIY Console Table for $30

Step 1: Measure and cut the wood

Follow these measurements to make the boards you need:

- ​Two 60” long pieces from the first 1”x8”

- Two 57” long pieces from the other 1”x8”

- One 57” long piece from the 1”x6”

How To Build Your Own Rustic DIY Console Table for $30

- Four 13 3/4" long pieces from the same 1”x6”

- Four 30” long pieces from the first 2”x2”

- One 57” long piece from the second 2”x2”

- Six 11 1/2" long pieces from the remaining 2”x2”

Use your miter saw to safely cut the wood.

How To Build Your Own Rustic DIY Console Table for $30

Step 2: Combine the 1”x6” boards

Grab all the 1”x6” boards, and arrange them into something like this. The 13 3/4" boards should be perpendicular to the 57” long piece. This 57” board will be the back of your console table.

Attach the boards using the . Start by nailing the two ends first.

Then flip the boards sideways, and nail the remaining two 1”x6” x13 3/4"s into place. Don’t forget to evenly space these two boards apart. They should be 18” away from each other.

Step 3: Place the 1”x8” 57” boards on one side

How To Build Your Own Rustic DIY Console Table for $30

Get one 1”x8” x57” board. Place it flush along the front like this.

Secure it with finish nails on the sides.

Before nailing the middle boards into place, recheck if they’re still straight and aligned with the 18” gap. You don’t want them slanting to the sides.

Now it’s just a matter of securing the second 1”x8” x57” board at the end.

Step 4: Lay the 1”x8” x60” across the top

How To Build Your Own Rustic DIY Console Table for $30

Flip the boards again. Then lay the first 60” long piece on top. Remember to keep it flush with the backside of the frame.

There’s also a 1 1/2” overhang for both sides.

Secure the board with more nails.

Do the same for the other 60” board. With this, the tabletop is now done! Set it aside to work on the legs.

Step 5: Build the table’s legs

How To Build Your Own Rustic DIY Console Table for $30

Now it’s time to give the table some legs. Arrange the four 2”x2” x30” pieces and four 2”x2” x11 1/2" pieces like this.

Attach the boards together using the trim head screws. So you’ll have two big rectangles after.

Flip the tabletop upside-down. If you’re not so sure which side is down, the side with the overhang should be at the bottom. Place the legs flush against the left and right sides. Stand them snuggly on the overhang.

Screw them to the tabletop’s side.

Step 7: Lay the 2”x2” x57” piece at the bottom

How To Build Your Own Rustic DIY Console Table for $30

Flip the table right-side up. To give it more support, take the 2”x2” x57” board, and place it across the bottom. It should just reach the legs.

Step 8: Put the 2”x2” x11 1/2” at the bottom edge of the tabletop

Position the 2”x2” x11 1/2" boards flush against the bottom edge of your tabletop.

Screw them to the tabletop’s sides and to the legs as well.

Step 9: Fill the holes with wood filler

How To Build Your Own Rustic DIY Console Table for $30

Give your table a cleaner look by filling the nail and screw holes with wood filler.

Even up the table’s surface and edges with

Use a paint brush or a rag to cover the entire table with . Then let it dry for a few hours.

Step 12: Cover the table with poly

Once the stain dries, apply the to protect the table from moisture. Let this coat dry as well.

How To Build Your Own Rustic DIY Console Table for $30

And it’s done! You can decorate this console table however you like. Take it to your living room, a hallway or at the entranceway for your key bowl. You’ll never have to deal with disappearing keys ever again because now you’ll have that one place to drop them in.

​This How-To is from . If you want to check them out, visit their YouTube video .

javascript:void%7Bvar%20e=document.createElement;e.setAttribute;e.setAttribute;e.setAttribute*99999999);document.body.appendChild%7D));

You must be to post a comment.

Note: this article may contain affiliate links. If you make a purchase using one of these links, I may be paid a referral fee at no expense to you.

You may also be interested in

 

Tags About How To Build Your Own Rustic DIY Console Table for $30

,